|
These are the
same weights we use in our lures and are spin cast in house
|
4 Gram Belly Weights
These are the mini 4
gram slugs like we use in our 1.5 slim needlefish and Charktail
needlefish kits. They are .312x.312 cylinders (5/16") |
 |
|
| |
|
|
|
6 Gram Belly Weights
These fit in a 8mm hole very
nicely and are .5" long. We have a special knurling pattern put into these so when they're glued they don't fall out. The glue grabs every
single nook and cranny and they hold very well! |
 |
|
| |
|
|
| 8.5 Gram Belly Weights
These are .375wide and
.5" tall, with integral grooves in them to allow your glue/epoxy to grab
better and hold them into the lure! 8.5 grams/.3 Oz
|
 |
|
| |
|
|
|
| 11
Gram Belly Weights
These are .5" wide and
.375" tall, with integral through hole which can be easily lined up with
your through wire instead of drilling! 11 grams/.4 Oz Also lets you
captivate the weight inside the lure so it will stay put.
This will give you a nice low
center of gravity when used in swimmers and needlefish...reduces roll.
As used in original Danny Sandeel Swimmers!
|
 |
|
| |
|
|
|
|
 |
| |
|
|
|
Micro Tail Weights
These are the smallest tail
weights we make, they are 1/2" long and 1/4" diameter with a .125 hole
through them which will accept a tail grommet directly. |
 |
|
| |
|
|
| Small Tail Weights
1/4 X 1" long.
Sized to allow insertion of a tail
grommet into them. |
 |
|
| |
|
|
| Medium Tail Weights
5/16 X 1"
long. Sized to allow insertion of a tail grommet into them. |
 |
|
| |
|
|
| Large Tail
3/8 X 1"
long. Sized to allow insertion of a tail grommet into them. |
 |
|
| |
|
|
|
|
Got a special size or a
custom part you need?
We can provide full parts mastering and mold building to manufacture
your parts for you!
Contact us for more details! |
|
 |
