|
6.5" long and
2.25 Oz size, stainless steel thru-wired completely.
All kits are
sanded out to 150 grit and require minimal sanding.
Kits are weighted with
two belly weights-can
easily be re-drilled for heavier weight.
Very nice swim action and is designed primarily as a big bass lure.
Setup for single 3-4/0 belly hook,
use a bucktail stub on the back for
the most action or a single dressed 5-6/0 siwash hook. Casts very well for a metal lip swimmer too!
All components are included except for split rings and hooks.
We use only USA made components in our kits!
This
swimmer is designed for more experienced kit builders. It requires gluing the lip in,
gluing the weights in, re-drilling weights with 1/8" drill bit, minor
sanding, and painting/finishing.
Very simple retrieve on this lure, it
will tail wiggle/waggle right on top.
These kits are all turned on our dedicated kit cnc machine and drilled
with precision and duplication second to none!
Can be painted with ordinary spray bombs,
or seal first and then paint with acrylic paints and a small brush
from AC Moore,
let them dry thoroughly and coat with a few coats of
clear spray paint or brush with epoxy etc in thin coats for more
durability.
|
