Limited Edition original "Plug
Builders Supply" kits
4" long and
1 Oz size, stainless steel thru-wired this is an eelskin swimmer unlike
you have never seen before!!
Small size with integral ring to keeping a rigged eel skin attached to
the lure, fits eel sizes commonly found today!
Eelskin swimmers are a deadly way of fishing
for stripers.
Information on how to rig and store this lure can be found
online in videos, and also some shops that have eelskins in stock can
show this to you.
It's very simple and when done properly will result in a fantastic way
to catch big bass!
Many use floss, heavy monofilament, tying thread, or a
small tyrap to hold the skin on the lure.
All kits are
sanded out to 150 grit and require minimal sanding.
Very nice swim action and is designed primarily as a big bass lure.
Casts very well for a metal lip swimmer too!
All components are included except for split ring and belly hook, which
we recommend a VMC #1 or 1/0 treble hook
for the belly and no hook on the rear. Stainless steel Krok swivel for
maximum durability!
Very
simple retrieve on this lure, it will tail wag right on top, and will
dive slightly on faster retrieve.
This swimmer is a good intermediate kit. It requires gluing the lip in,
gluing the grommet in, minor
sanding, and painting/finishing.
These kit bodies were made by Jim Brown himself, they were highly prized
as a top lure back when he sold them, these are a piece of history
today!
Can be painted with
Salty's Lure Paint, Createx Air brush
paints, or with acrylic paints and a small brush
from AC Moore,
let them dry thoroughly and coat with a few coats of
clear spray paint or brush with epoxy etc in thin coats for more
durability.
Lures need to be finish sealed to prevent water intrusion. Checkout our
Super Coat, it makes a great wood sealer and Top Coat!
|