1.5" long and 1.25 Oz size, stainless steel thru-wired this is a great little swimmer! 1/2" holographic molded eyes!
All kits are sanded out to 150 grit and require minimal sanding.
All components are included except for split rings and hooks which we recommend 1/0-2/0 treble hook for the belly
and a dressed stub on the tail of  this lure. We do not recommend using a tail hook on this swimmer as it will foul.
We use only USA made components in our kits!

Very simple retrieve on this lure, it will tail wag right on top.
This swimmer is a good intermediate kit. It requires gluing the lip in, minor sanding, and painting/finishing.
These kits are all made on our dedicated kit cnc machines and drilled with precision and duplication second to none!

Can be painted with ordinary spray bombs, or seal first and then paint with Apple Barrel paints and a small brush from AC Moore, let them dry thoroughly and coat with a few coats of clear spray paint or brush with epoxy etc in thin coats for more durability.
 

All images and pages Copyright 2002-2010 by Scott Bullock/Salty's